Web Gondola 03 OTS Offshore

OTS Gondola System: Custom-Engineered Acoustic Sensor Deployment Platform for Survey Vessels

OTS's customized Gondola System
Figure 1: OTS’s customized Gondola System

No two survey vessels are built the same — and no off-the-shelf bracket can guarantee that a multibeam echosounder stays perfectly aligned through months of offshore operation. That’s the engineering challenge behind the OTS Gondola System: a fully custom-engineered underwater acoustic sensor deployment platform, designed and fabricated in-house for hydrographic, geophysical and geotechnical survey vessels.

What Is the OTS Gondola System?

Gondola Mouting Frame
Figure 2: Gondola Mouting Frame

The OTS Gondola System is a modular structural platform that mounts, aligns and protects acoustic transducers — such as MBES (Multibeam Echosounder), SBP (Sub-Bottom Profiler) and USBL (Ultra-Short Baseline) systems — below the vessel hull. Rather than a single component, it’s an integrated assembly of three purpose-built parts working together:

  • Gondola Mounting Frame — the modular deployment frame that interfaces directly with the vessel’s hull structure, engineered to each vessel’s specific geometry and load path.
Gondola Lower Mouting Base
Figure 3: Gondola Lower Mouting Base
  • Lower Mounting Base — a precision-machined base with dual flanged connection holes, built for tight mounting-interface tolerances and reliable sensor positioning.
Gondola Composite Housing
Figure 4: Gondola Composite Housing
  • Gondola Housing (Composite Housing) — a hydrodynamic composite enclosure that mounts, aligns and protects the acoustic transducers from drag, impact and marine fouling.

Key Applications

The Gondola System is built specifically for vessels running high-precision seabed and sub-seabed survey operations, including:

  • Hydrographic surveys
  • Geophysical surveys
  • Geotechnical surveys
  • Acoustic sensor deployment for MBES, SBP and USBL systems

Engineering Behind Every Gondola System

Gondola Design & Fabrication
Figure 5: Gondola Design & Fabrication

A gondola sits in one of the most demanding positions on the vessel — permanently exposed to hydrodynamic loads while needing to hold sensor alignment to a fine tolerance. OTS’s engineering process accounts for:

  • Vessel motion — pitch, roll and slamming loads across different sea states
  • Hydrodynamic drag — housing geometry optimized to minimize drag and flow-induced noise that could interfere with acoustic sensor performance
  • Structural load transfer — load paths engineered from the housing through the mounting base into the vessel’s hull structure
  • Sensor alignment accuracy — tight control on mounting-interface dimensions to keep MBES/SBP/USBL sensors correctly aligned throughout operation

Why Survey Operators Choose OTS

  • End-to-end, in-house capability — design, FEA verification, fabrication, NDT and load testing are all handled under one roof, without routing the project through multiple third parties.
  • Made-to-Order (MTO) engineering — every Gondola System is engineered around the vessel’s actual hull geometry and mounting points, not a generic template.
Certified quality systems - EN ISO 3834-2
Figure 6: Certified quality systems – EN ISO 3834-2
  • Certified quality systems — fabrication controlled to EN 1090-2 EXC3 and EN ISO 3834-2, backed by ISO 9001:2015 and ISO 45001:2018 management systems.
  • Field-tested reliability — structures are load-tested and NDT-inspected before delivery, giving operators a verified, certificate-backed handover.

Get a Gondola System Engineered for Your Vessel

Every vessel is different — and so is every Gondola System OTS builds. Talk to our engineering team about your hull geometry, sensor package and deployment requirements, and we’ll scope a solution from design through to load-tested delivery.

Get in Touch with OTS Offshore

Looking for a manufacturing partner for your next offshore or subsea equipment project? Contact OTS Offshore to discuss how our design and logistics capabilities can support your project.

Phone: +84 254 354 0969 – +84 908 52 54 74

Email: [email protected]  –  [email protected]

Leave a Reply

Your email address will not be published. Required fields are marked *